Port forwarding on Linksys router

This article needs categories Apollo

This article may conflict with the article Port forwarding. Think about a solution to migrate this article Apollo

Follow these instructions to forward ports on most Linksys routers.

The router used for this tutorial is a Linksys WRT54G.

All photos courtesy of PortForward.com.

1. Go to your router page by typing the internal IP address in the address bar of your preferred internet browser

   It is typically 192.168.1.1 for Linksys routers

2. Log into your router

   Default username and password fields are usually "admin"

3. At the top, click on "Applications and Gaming"
4. In the row below that, click "Port Range Forward"
5. Find an empty row and click the field under "Application"
6. Enter "Assaultcube"
7. Under start, enter the first port you want to use for AC (default: 28763)
8. Under end, enter the consecutive port you want to use for AC (default: 28764)
9. Make sure that it says "both" for "Protocol"
10. Enter the last digit of your internal IP address in the next field

    If you followed the earlier tutorials for setting a static IP, the default was 250

11. Check "Enable"
12. Scroll to the bottom of the page and click "Save Settings"

Steps 3-12